Auto Drain Trap Manufacturers And Suppliers
Advantages
Continuous condensate discharge ‘NO’ Compressed Air consumption for trap operation.
Can handles high starting condensate load.
Very good performance at High as well as Low condensate load.
Suitable for very low pressure application.
Two year Performance guarantee of the Trap.
Rotary valve gives scrapping effect, doesn’t allow to deposit dirt on valve seat.
About
We are well aware of that Water in a compressed air system is a nuisance that causes downtime and maintenance.
The moisture will wash away the lubrication from system.
The presence of water will lead to the formation of rust and scale in the air piping system.
Air dryers and inline filtration products will not perform if they become overloaded with liquid contamination.
Features
Only one working part resulting negligible maintenance.
Very simple float & rotary plug valve mechanism.
Independent of pressure fluctuations.
Wide operation range – Up to 320 kg/cm².
Trouble-free operation without any Compressed Air Leakage.
All moving part SS316, Body MOC cast steel.(No corrosion & its effect).
Suitable for very high as well as very low condensate load.
Discharge condensate proportionate to rate of condensate accumulation.
Initial cost is also less w.r.t. other trap.
We are well aware of that Water in a compressed air system is a nuisance that causes downtime and maintenance.
• The moisture will wash away the lubrication from system.
• The presence of water will lead to the formation of rust and scale in the air piping system.
• Air dryers and inline filtration products will not perform if they become overloaded with liquid contamination.
Solution
To overcome these problems, We suggest use ‘BEP’ Auto Drain Trap.


User Friendly Mechanism

Cost of Compressed Air Leakage
Consideration – ½” Size Electronic Auto Drain Valve, Will open for 5 sec. after every 5 minutes; Compressed Air Sys. Operation – 27 days/month | |
No. Of Operation in Hour | 12 Nos |
Total Time ‘OPEN’ – in one Hour | 1 Minute |
Total Time ‘OPEN’ – in one month(Considering 27 Working days) | 648 Minutes |
Total Time ‘OPEN’ – in one year | 129.6 Hours |
If 6.4mm Orifice Open = 12 KW electrical energy wasted per Hour Considering – 7kg/cm² compressed air pressure Electricity Tariff – Rupees 7/- per KWH |
|
Electricity Wasted | 1555.2 Kwh |
Total Cost Involved | 10886.40 Rupees |
Product Range
Condensate Discharge – Up to 48000 kg/hr
End Connection – welded / Screwed / Flange End
Sizes Available - 15 NB to 100 NB
Pressure range - Up to 320 Kg/cm²
Installation – Vertical / Horizontal / Right Angel
Get In Touch
We provide the best engineered process plant equipment.
About Us
Established in 2012, FLOWTECH SYSTEMS & ENGINEERS, is a rapidly growing Mumbai based company known for manufacturing high quality Process Plant Equipments for R&D, Pilot plant & manufacturing units. Our longstanding experience and vision strengthens us to foresee customer's minutest requirement.
Review
Click for Reviews of Flowtech Systems
5 out of 5 based on 3 ratings.
Our Address
FLOW TECH SYSTEMS & ENGINEERS
Contact Person - MR.PRASANNA OGALE
Address - 511, Vakratunda Corporate Park,Off Aarey Road, Goregaon (E), Mumbai–400063, Maharashtra, India
Tel. No. - 022-29277156 / 29272690
Mob. No. - + 91 98205 50114
Email. - response@flowtechsystems.in